|
Author
|
Topic: rubber spacers
|
wireAnt
unregistered
|
posted 11-30-2003 08:02 PM
HI,
Does anyone know where I can get a small quantity (100) of rubber spacers. I'm looking for a spacer between pieces of wood with a bolt through the middle. So, basically 1 layer of wood a rubber spacer and another layer of wood with a bolt through the center to hols them together. The approximate size is 3/4" od, 3/8" id, and 3/4" to 1" long. The diameters can varry by a 1/16". Since I don't have any of the other parts yet I can adapt to the spacers that I find. Thanks a lot.
Nick
IP: Logged |
yeah
unregistered
|
posted 12-01-2003 11:10 PM
mcmaster carr- you could look up buna-n o-rings.IP: Logged |
Mister
unregistered
|
posted 12-06-2003 10:14 PM
depending on the tools and ability at your disposal you may:• cut your own using a knifed circle cutter • mold your own using a lower durometer
(rubbery) urethane resin • cut from rubber hose I found a source
that is 3/4" OD 3/8" ID at $3.57per ft. http://www.wicksaircraft.com/gotopage.php?page=149 IP: Logged |
mister
unregistered
|
posted 12-11-2003 10:23 PM
.375 ID x .75 OD x 1.08"
40 Buna N
230 pcs min order @ .22 ea www.estcoenterprises.com
(760) 489 8745
ask for Gemma Portnoy
IP: Logged |
Core77 Discussion Groups
UBBFriend: Email This Page to Someone! 
